Thoughtfully better care

Water Dispenser Care

Simple setup, smooth pouring, and practical care for your GentleJet water dispenser. Use Product Support whenever you need the exact manual for your model.

Set up with confidence

First use

Set up with confidence

Before first use, prepare the inlet hose as directed in your manual. Fit it securely, seat the unit on the bottle, open the spout, and charge before dispensing.

Choose your pour

Everyday use

Choose your pour

Choose 200 mL, 600 mL, 800 mL, or continuous pumping where your model offers those controls. Press again to stop continuous pumping; the unit also stops automatically after 3 minutes.

Care for the inlet hose

Keep it fresh

Care for the inlet hose

Boil the silicone hose for a few minutes before first use and every two months. Replace the hose after six months, and empty remaining water before long storage.

Everyday routine

Set up, pour, and keep it fresh.

Start with a secure inlet hose and an open spout. Choose the amount you need, use water only, and keep the hose clean before long storage.

Dispensing amounts200 / 600 / 800 mL

Quick answers

Helpful details

What can I dispense?

Use water only. Do not pump alcohol, oil, corrosive liquids, or water hotter than 55 C.

Why is no water coming out?

Check that the inlet hose is fitted securely, the unit is seated on the bottle, the spout is open, and the unit has sufficient charge.

How do I clean and store it?

Do not immerse the unit in water. Keep the inlet hose hygienic as directed, and make sure no water remains in the unit before long-term storage.